Toggle Pads
Carbide Tipped Toggle Pads provide multiple point contact to compensate for surfaces that are rough or out-of-round. Points will embed themselves in the workpiece, which assures positive gripping. It eliminates possible radial load on the workpiece. Note: Metric Toggle Pads have two flats instead of a hex configuration on the head.
- Material: 4140 or Carbide insert tip
- Finish: Black Oxide
- Heat Treat: Plain Pad Rc 36-40
- Thread: 2B-UNC
- Available in FixturePro Design Software and PartSpec CD
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
 CAD Download Link |
|
| 1/4-20 | 1/2 | 1/2 | 9/16 | .055 | No |
| 5/16-18 | 9/16 | 11/16 | 5/8 | .055 | No |
| 3/8-16 | 5/8 | 25/32 | 11/16 | .055 | No |
| 1/2-13 | 3/4 | 7/8 | 13/16 | .055 | No |
| 5/8-11 | 7/8 | 1 | 15/16 | .086 | No |
| 3/4-10 | 1 1/16 | 1 5/32 | 1 1/8 | .086 | No |
| 1/4-20 | 1/2 | 9/16 | 9/16 | .055 | Yes |
| 5/16-18 | 9/16 | 3/4 | 5/8 | .055 | Yes |
| 3/8-16 | 5/8 | 53/64 | 11/16 | .055 | Yes |
| 1/2-13 | 3/4 | 15/16 | 13/16 | .055 | Yes |
| 5/8-11 | 7/8 | 1 1/32 | 15/16 | .086 | Yes |
| 3/4-10 | 1 1/16 | 1 1/4 | 1 1/8 | .086 | Yes |
| | METRIC | | | | | |
| M6x1.0 | 12 | 13 | 14 | 1.4 | No |
| M8x1.25 | 14 | 17 | 16 | 1.4 | No |
| M10x1.5 | 16 | 18 | 18 | 1.4 | No |
| M12x1.75 | 22 | 22 | 21 | 1.4 | No |
| M16x2.0 | 22 | 25 | 24 | 2.2 | No |
| M20x2.5 | 30 | 29 | 28 | 2.2 | No |
| M6x1.0 | 12 | 14 | 14 | 1.4 | Yes |
| M8x1.25 | 14 | 18 | 16 | 1.4 | Yes |
| M10x1.5 | 16 | 20 | 18 | 1.4 | Yes |
| M12x1.75 | 22 | 24 | 21 | 1.4 | Yes |
| M16x2.0 | 22 | 26 | 24 | 2.2 | Yes |
| M20x2.5 | 30 | 31 | 28 | 2.2 | Yes |
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).
