Self-Centering Vises
Jergens 5-Axis Self-Centering Vises are suitable for many clamping tasks on 5-Axis machining centers and pallet systems. Whether the workpieces are angular or round, the concentric clamping system provides the same zero position.
The compact design, high stability and versatile selection of jaws (grip jaws, plain jaws, soft jaws, pendulum jaws, V-Type jaws) are additional features tailored for 5-Axis machining.
The 40, 60, 100 and 125 clamping systems are suitable for ID to OD clamping.
Available in 40mm, 60mm, 100mm, and 125mm.
Fixed Jaw Vises
Designed especially for multi-face machining with a single clamping operation. Ideal for machining complicated workpieces in a single clamping operation, such as in mold making. These vises are small, but have a large holding capacity. A variety of jaw options increase the range of applications. Grip jaws and V-type jaws enhance the retention force of the workpiece. The hydraulic version provides automatic power clamping with exact force.
Available in 40mm, 60mm, 60mm hydraulic.
Compact Vises
New machining technologies and manufacturing methods call for the development of new solutions in clamping technology. The Jergens 5-Axis Compact Vise, with its short base and easy movement of the fixed jaw, is ideal for 5-sided machining.
The well balanced design of the guide between the base and the moveable jaw allows the use of high clamping jaws, for performing machining operations close to the workpiece.
The base is made from cast steel for rigidity and dimensional stability. All sides are hardened and ground.
Available in 80mm, 120mm, standard and hydraulic.
130mm Dovetail Vises
Mounts directly to a rotary table, Fixture Pro® Riser or any QLS Grid. Reduces distortion of parts. Requires 0.060" or less material to clamp.
Cutting a 10° angle cut in the bottom surface of a machinable part allows for extremely high clamping forces while leaving all 5 sides accessible. The heavy duty 130mm version has higher torque and tilting moments than the standard 130mm Fixture Pro® Dovetail Vise.
Dovetail cutter (part number SDC3) available..
Pallet Clamps
Jergens pallet clamps (comprised of clamping jaws with a grip structure) can be used either for concentric clamping or for clamping to the fixed jaw. These pallet clamps are an effective, affordable clamping solution.
Quick Clamping Block (QCB)
The Jergens 5-Axis Quick Change System (QCB) is an ideal partner for the Jergens 5-Axis Clamping System. The QCB changes the workpiece position on 5-Axis machining centers. This helps reduce interference for the tool.
Rapid and precise change of clamping elements optimize efficiency. The QCB with its integral mechanical Zero-Point Clamping System provides you with the ability to increase productivity and lower costs.
Drop & Lock™ Pallet Changer
Jergens Workholding Solutions presents a truly modular approach to 5-Axis machining. The Drop & Lock™ Pallet Changer serves the same function as a fixture plate, although it doesn't have to be locked down with set screws. Instead, it is installed with pull studs dropping into the bottom of the fixture or vise to literally drop into the pallet changer. Available in Round or Square patterns. Drop it, Lock it, and Go!