Large Swing Cylinders
- Standard without an arm.
- Single or double arms are available.
- Can be mounted using four 3/8" cap screws,
or the 1 7/8"-16 O.D. thread of the cylinder.
- Optional components include a jam nut or a mounting bracket to replace old Jergens part number 60621.
- Can be used as a non-rotating clamp.
- Maximum recommended flow rate is 90 cubic inches per minute per clamp. (Approximately 1 second clamp time.)
- Available in 3D Solid Models from the web and FixturePro Plus CD
- Note: Arm length can affect clamping pressures. All swing cylinders must be used with flow limit valves to dampen the rotating action. See max flow rate limit shown above.
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
|
| (Pull) | (Push) |
|---|
| Operating Volume (Cu. in) | 1.5 | 2.7 |
|---|
| Effective Piston Area ( Sq. in) | 0.98 | 1.77 |
|---|
| Minimun Operating Presssure (PSI) | 200 | - |
|---|
| Maximum Operating Pressure (psi) | 3000 | 3000 |
|---|
| Maximum Output Force | 2900 | 5300 |
|---|
| Stroke (in) Full | 1.5 | 1.5 |
|---|
| Stroke (in) Rotating | 1 | 1 |
|---|
| Stroke (in) Clamping | 0.5 | 0.5 |
|---|
| Weight (lbs) | 5 | 5 |
|---|
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).
